HP ProCurve 7102dl Reference Manual page 1255

SROS Command Line Interface Reference Guide
netbios-name-server <address1> <address2>
Use the netbios-name-server command to specify the NetBIOS Windows Internet Naming Service
(WINS) name servers to assign to a client. Use the no form of this command to remove assigned name
servers.
Syntax Description
<address1>
<address2>
Default Values
By default, no WINs server address is defined.
Usage Examples
The following example defines two WINs server addresses for this configuration pool:
ProCurve(config-ike-client-pool)#netbios-name-server 172.16.17.1 172.16.17.25
5991-2114
Specifies the first WINs server address to assign.
Specifies the second WINs server address to assign.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
IKE Client Command Set
1253