HP ProCurve 7102dl Reference Manual page 1275

SROS Command Line Interface Reference Guide
permit [<community-number> | internet | local-as | no-export |
no-advertise]
Use the permit command to add an entry to the community list that allows only BGP routes containing the
specified community number in the community attribute. Use the no form of this command to remove the
statement from the community list.
Syntax Description
<community-number>
internet
local-as
no-export
no-advertise
Default Values
No default value necessary for this command.
Usage Examples
The following example permits BGP routes that match the as-path attributes:
ProCurve(config)#ip as-path-list listname
ProCurve(config-as-path-list)#permit 30:22
5991-2114
Permits routes that contain this value in their community attribute. This is a
numeric value that can be an integer from 1 to 4,294,967,295 or string in the
form "aa:nn", where the value of "aa" is the AS number and the value of "nn"
is the community number. Multiple community number parameters can be
present in the command.
Permits routes that contain the reserved community number for the
INTERNET community.
Permits routes that contain the reserved community number for
NO_EXPORT_SUBCONFED. Routes containing this attribute should not
be advertised to external BGP peers.
Permits routes that contain the reserved community number for
NO_EXPORT. Routes containing this attribute should not be advertised to
BGP peers outside a confederation boundary.
Permits routes that contain the reserved community number for
NO_ADVERTISE. Routes containing this attribute should not be advertised
to any BGP peer.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
AS Path List Command Set
1273