HP ProCurve 7102dl Reference Manual page 1297

SROS Command Line Interface Reference Guide
set ip dscp [<value> | afxx | csxx | default | ef]
Use the set ip dscp command to configure the route map to set the Differentiated Services Code Point
(DSCP) value in the IP header of the packet for traffic serviced by this route map. For more details on
DSCP values, see the command match ip dscp [<value> | afxx | csxx | default | ef] on page 1280. Use the
no form of this command to remove the specified DSCP value.
Syntax Description
<value>
afxx
csxx
default
ef
Default Values
No default value necessary for this command.
Usage Examples
The following example instructs the route map named MyMap to set the IP header with a DSCP Assured
Forwarding Class 1, Subclass 2 (af12):
ProCurve(config)#route-map MyMap permit 100
ProCurve(config-route-map)#set ip dscp af12
5991-2114
Specifies the DSCP numeric value. (Valid range: 0 to 63.)
Specifies the assured forwarding (AF) class and subclass. Select from:
11 (001010), 12 (001100), 13 (001110), 21 (010010), 22 (010100),
23 (010110), 31 (011010), 32 (011100), 33 (011110), 41 (100010),
42 (100100), or 43 (100110).
Specifies the class selector (CS) value. (Valid range: 1 to 7.)
Specifies the default IP DSCP value (000000).
Specifies marking for expedited forwarding (EF).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Route Map Command Set
1295