HP ProCurve 7102dl Reference Manual page 1301

SROS Command Line Interface Reference Guide Route Map Command Set
set metric <value>
Use the set metric command to specify a metric value for the route map. Use the no form of this command
to cancel the metric value.
Syntax Description
<value> Sets the metric value. (Valid range: 0 to 4,294,967,295.)
Default Values
No default value necessary for this command.
Usage Examples
The following example sets the metric value for MyMap to 100:
ProCurve(config)#route-map MyMap permit 100
ProCurve(config-route-map)#set metric 100
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 1299