HP ProCurve 7102dl Reference Manual page 1308

SROS Command Line Interface Reference Guide BGP Configuration Command Set
bgp log-neighbor-changes
Use the bgp log-neighbor-changes command to control the logging of neighbor state changes. Use the no
form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, neighbor changes are not logged.
Functional Notes
This command controls logging of BGP neighbor state changes (up/down) and resets. This information is
useful for troubleshooting and determining network stability.
Usage Examples
The following example enables logging of BGP neighbor state changes:
ProCurve(config)#router bgp 65000
ProCurve(config-bgp)#bgp log-neighbor-changes
5991-2114 © Copyright 2006 Hewlett-Packard Development Company, L.P. 1306