Quality Of Service Configuration - Panasonic PN28160K Operation Manual

4.7.5 Quality of Service Configuration

On the Advanced Switch Configuration Menu, pressing "S" opens the
Quality of Service Configuration Menu, as shown in Fig. 4-7-21. You can
configure the QoS (Quality of Service) setting of the Switching Hub.
PN28160K Local Management System
Main Menu -> Quality of Service Configuration Menu
[T]raffic Class Configuration
[E]gress Rate Limiting
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Available commands are listed below.
T Go to the configuration screen for traffic class.
Press "T." The Traffic Class Configuration Menu opens. For configuration details,
refer to 4.7.5.a.
E Go to the configuration screen for bandwidth.
Press "E." The Egress Rate Limiting Configuration Menu opens. For configuration
details, refer to 4.7.5.b.
Q Return to the previous menu.
Fig. 4-7-21 QoS Configuration
154