4.5. QoS (Quality of Service) Configuration
Configure the QoS settings in "Global configuration mode." Confirm the basic
information by executing the "show mls qos" command in "Privileged mode."
Command to show the QoS configuration
M24eG#
Command to show the CoS-to-que mapping configuration
M24eG#
Command to enable the QoS function
M24eG(config)#
Command to disable the QoS function
M24eG(config)#
Command to configure the CoS-to-que mapping
M24eG(config)#
show mls qos
show priority-queue cos-map
mls qos
no mls qos
priority-queue cos-map <priority> <traffic class>
230