Snmp Trap Receiver Configuration - Panasonic M24PWR Operation Manual

4.6.3.b. SNMP Trap Receiver Configuration
On the SNMP Configuration Menu screen, pressing "T" opens the SNMP
Trap Receiver Configuration Menu screen, as shown in Fig. 4-6-6. On this
screen, you can set the SNMP Trap sending settings.
PN23249K/PN23249A Local Management System
SNMP Configuration -> SNMP Trap Receiver Configuration Menu
Trap Receiver List:
No. Status
---- --------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
-------------------------------- <COMMAND> -----------------------------------
Set Receiver [S]tatus
Set Trap [T]ype
Command>
Enter the character in square brackets to select option
Fig. 4-6-6 SNMP Trap Receiver Configuration
Screen Description
Trap Receiver Displays the IP address and the community name for the current trap
List: receiver.
No.
Status
Type
IP Address
Community
Type IP Address
----- ---------------
v1 0.0.0.0
v1 0.0.0.0
v1 0.0.0.0
v1 0.0.0.0
v1 0.0.0.0
v1 0.0.0.0
v1 0.0.0.0
v1 0.0.0.0
v1 0.0.0.0
v1 0.0.0.0
Set Receiver [I]P
Set Receiver [C]ommunity
Displays the entry number for the trap receiver.
Displays the trap sending setting.
Enabled Sends traps.
Disabled Does not send traps.
Displays the Trap type.
V1 Sends SNMPv1 traps.
V2 Sends SNMPv2 traps.
Displays the IP address of the trap receiver.
Displays the current community name, set for sending
traps.
37
Community
----------------------------
In[d]ividual Trap Config
[Q]uit to previous menu