Ieee802.1X Port-Based Authentication Configuration - Panasonic PN28058 Operation Manual For Cli

IEEE802.1X Port-Based Authentication Con -
4.7.
figuration
Configure IEEE802.1X in "Global configuration mode" and "Interface configuration
mode." Display the basic information by entering "show dot1x <1-2 or 1,2,3 or
1,2,3-5>" in "Privileged mode."
NAS ID configuration command
Global configuration mode
NAS ID delete command
Global configuration mode
Authentication status initialization command
Interface configuration mode
Maximum resend count configuration command
Interface configuration mode
Authentication operation configuration command
Interface configuration mode
Local re-authentication interval configuration and enable command
Interface configuration mode
Re-authentication status initialization command
Interface configuration mode
Re-authentication enable command
Interface configuration mode
Re-authentication disable command
Interface configuration mode
Waiting time configuration command after authentication fails
Interface configuration mode
Re-authentication interval configuration command
Interface configuration mode
Authentication server timeout configuration command
Interface configuration mode
Supplicant timeout configuration command
Interface configuration mode
Interval configuration command for sending authentication request
Interface configuration mode
Authentication configuration display command
Privileged mode
dot1x nas-id <NASID>
no dot1x nas-id
dot1x init
dot1x max-req <value>
dot1x port-control {auto | force-authorized | force-
unauthorized}
dot1x re-auth-timer local
dot1x re-authenticate
dot1x re-authentication
no dot1x re-authentication
dot1x timeout quiet-period <seconds>
dot1x timeout re-authperiod <seconds>
dot1x timeout server <seconds>
dot1x timeout supp-timeout <seconds>
dot1x timeout tx-period <seconds>
show dot1x <port-list>
44