Authentication Function Configuration - Panasonic PN28080K Operation Manual

4.8. Authentication Function Configuration

Configure the authentication function in "Global configuration mode" and
"Interface configuration mode." Display the basic information in "Privileged
mode."
Authentication aging time configuration command
M24eG(config)#
Authentication cancel command for authorized host
M24eG(config)#
Command with RADIUS Attribute
M24eG(config)#
Command without RADIUS Attribute
M24eG(config)#
Guest VLAN configuration command
M24eG(config-if)#
Guest VLAN delete command
M24eG(config-if)#
Default VLAN configuration command
M24eG(config-if)#
Default VLAN delete command
M24eG(config-if)#
Authentication function configuration display command
M24eG#
Authentication status table display command
M24eG#
Dynamic VLAN configuration display command
M24eG#
authentication aging-time <0-65535 min>
no authentication mac <mac addr>
authentication dynamic-vlan radius-attribute
no authentication dynamic-vlan radius-attribute
authentication guest-vlan <vlan-id>
no authentication guest-vlan
authentication default-vlan <vlan-id>
no authentication default-vlan
show authentication
show authentication sort {mac | port [<portlist>]}
show dynamic-vlan
250