System Authentication Log - Panasonic GA-ML Series Manual

3.4.6

System Authentication Log

Use the following window to implement the settings on a system
authentication log and display its settings.
Choose System > System Log > System Authentication Log to display
the following window.
In the section of System Authentication Log, you can configure the
following parameters.
Parameter
Authentication Log
State
Write Delay for
Authentication Logs
Tail
Click Apply to reflect the change.
Click Find to search the entry in a table based on the search condition
specified.
Click Show All to search all the entries available for displaying them.
Click the Clear Log button to clear the log entry from a table.
Figure 3-15 System Authentication Log
This parameter enables or disables an authentication
log.
Enter the write-delay value of the authentication log.
The range is from 1 to 1,440 (minutes).
Enter the number of the latest authentication log-
entries to be displayed. The range is from 1 to 256.
3.4.6 System Authentication Log
Overview
3 System
32