Various Settings; Network Settings - Panasonic AV-HS6000 Series Operation Manual

Various settings

Network settings

Configure the network for the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4 and the Main Frame AV‑HS60U1/AV‑HS60U2.
Configuring the network for the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4
Configure the network for the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4.
f The terminals connected to the Main Frame AV-HS60U1/AV-HS60U2 differ depending on the number of Control Panel AV-HS60C1/AV-HS60C2/
AV-HS60C4.
- When only one panel is connected
Connect the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 to the <PANEL> terminal of the Main Frame AV-HS60U1/AV-HS60U2. It is not
necessary to perform the network setting of the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4.
- When two or more panels are connected
Connect the first Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4 (main control panel) to the <PANEL> terminal of the Main Frame AV‑HS60U1/
AV-HS60U2.
Connect the second and subsequent Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 (sub control panel) to the <LAN> terminal of the Main
Frame AV-HS60U1/AV-HS60U2. It is necessary to change the network setting of sub control panel before connecting.
f The default setting is as follows: IP address: 10.0.0.2, subnet mask: 255.255.255.248, IP address of the connecting Main Frame: 10.0.0.1, and default
gateway: 0.0.0.0
r AV‑HS60C1/AV‑HS60C2
B bus XPT button
r AV‑HS60C4
A bus XPT button
1
Turn off the power of the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4.
Chapter 4 Preparations — Various settings
Source display
A bus XPT button
Source display
B bus XPT button
Status display
BUS
SHFT
BUS
SHFT
<AUTO> button
Status display
CHR LIN LUM FULL
BUS
MIX MIX MIX WIPE
SHFT
02s01f 01s00f 01s00f 01s00f
CHR
BUS
WIPE
SHFT
01s00f
<AUTO> button
<CUT> button
– 47 –
<KEY1> button
<KEY4> button
<KEY1 TRNS> button
<CUT> button
<KEY1> button
<KEY4> button
LIN FULL FULL
MIX MIX MIX
01s00f 01s00f 01s00f
<KEY1 TRNS> button