Introduction
N5531S System Block Diagram
N5531S System Block Diagram
A block diagram of the N5531S Measuring Receiver System is shown below.
The system consists of:
1. PSA with Option 233 (refer to
Table 2-1 on page
41.)
1. P-Series Power Meter (refer to
Table 2-2 on page
41.)
1. N5532A/B Sensor Module (refer to
Table 2-3 on page
42.)
Figure 1-2
N5531S System Block Diagram
The N5532A/B Sensor Module receives the incoming RF signal from the DUT and
splits it between the Power Meter and PSA. The RF Power and Absolute Tuned RF
Level measurements use the sensor module and power meter, whereas all other
measurements are performed using the PSA.
Chapter 1
29