DISPlay[:WINDow<1|2>]:TRACe<1...3>:MODE WRITe | VIEW | AVERage | MAXHold |
MINHold
The command specifies the display type and evaluation mode for the specified trace.
The query returns the current state of this setting for the specified trace.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Range
Backwards Compatibility SCPI
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>[:STATe] ON | OFF
The command switches on or off display of the corresponding trace.
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Backwards Compatibility SCPI
FORMat Subsystem
The FORMat subsystem specifies the format of data transmitted from and received by the instrument.
FORMat[:DATA]
The command specifies the format for data transmitted from the instrument to a control PC.
This command is specific to X-Series analyzers.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:DISPlay:WINDow[1]:TRACe[1]|2|3:MODE
WRITe|VIEW|AVERage|MAXHold|MINHold
:DISPlay:WINDow[1]:TRACe[1]|2|3:MODE?
DISP:WIND1:TRAC:MODE WRIT
FSE, FSP, FSU
WRITe
Saved in instrument state.
WRITe | VIEW | AVERage | MAXHold | MINHold
:DISPlay:TRACe[1]|2|3:MODE
:DISPlay[1]:WINDow[1]:TRACe[1]|2|3[:STATe] ON|OFF|1|0
:DISPlay[1]:WINDow[1]:TRACe[1]|2|3[:STATe]?
DISP:TRAC1 ON
FSE, FSP, FSU
ON for Trace 1, OFF for the others
Saved in instrument state.
:DISPlay[1]:TRACe[1]|2|3[:STATe]
Compatible SCPI Commands
Supported SCPI Commands
113