Sflow Max-Header-Size Extended - Dell S6100 Configuration Manual

Usage Information Dell Networking OS enhances the sflow implementation for real time traffic analysis on the E-Series to provide
extended gateway information in cases where the destination IP addresses are learned by different routing
protocols and for cases where the destination is reachable over ECMP.
Related Commands
•

sflow max-header-size extended

Set the maximum header size of a packet to 256 bytes.
Syntax sflow max-header-size extended
To reset the maximum header size of a packet, use the[no] sflow max-header-size extended
command.
Parameters
extended
Defaults 128 bytes
Command Modes
CONFIGURATION
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.7(0.0)
Example
Dell(conf)# sflow max-header-size extended
sflow polling-interval (Global)
Set the sFlow polling interval at a global level.
Syntax sflow polling-interval interval value
To return to the default, use the no sflow polling-interval interval command.
Parameters
interval value
show sflow — displays the sFlow configuration.
Enter the keyword extended to copy 256 bytes from the sample packets to sFlow
datagram.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S Series and Z Series switches.
Enter the interval value in seconds. The range is from 15 to 86400 seconds. The default is
20 seconds.
sFlow 1487