Listing The Entries In The Call Branding Table; Displaying A Single Call Branding Entry; Displaying All Call Entries In The Call Brand Table - Avaya CS700 Administration And Maintenance

Listing the Entries in the Call Branding Table

You can display a single entry or all entries in the call branding table.

Displaying a single call branding entry

Use the cbutil lookup parameter to display a single call branding entry.
cbutil lookup <"dnis">
where <dnis> is the DNIS for entry to display.

Displaying all call entries in the call brand table

To display all of the entries in the call brand table:
1. Issue the count command to determine the number of entries in the call branding table.
cbutil count
The system displays the current number of call brand records.
2. Go to the next step if the count is less than 2000. However, when the count exceeds 2000,
set the environment variable ROW_SET_MAX, from the Unix command line to a number
greater than the returned count. When using tsch, the command is:
setenv ROW_SET_MAX <number>
where <"number"> equals 1 plus the number returned by the count command.
3. Use the list command to list the entries in the Call Branding table.
cbutil <list> [<pgsize>]
Where
pgsize
<
If the number of records in the call branding table exceeds 2000, the system displays this
message:
Large number of entries encountered.
To list the entries do the following:
Run 'cbutil count' to get number of entries.
Then set the environment variable ROW_SET_MAX to a
number greater than the number of entries found.
Return to step
is the number of entries to list per page. The default is 25.
>
2 to resolve this issue.
Branding Calls using cbutil
Issue 1 August 2007 91