Rep 14.1 Top Cover - Xerox 8850 Service Manual

REP 14.1 Top Cover

Parts List on PL 14.5, SPS 510dp
Switch off the Controller and the Printer Main Power Switches. Disconnect the Printer
Power Cord.
Removal
1. (Figure 1): Open the Printer Rear Door.
2
Swing open the door
Figure 1 Opening the Printer Rear Door
2. (Figure 2): Lift and latch the Printer Top Cover.
8850/ 510DP
PL 14.6
WARNING
1
(8850) Loosen the 2 retaining
screws
(510dp) Release the Latch using
the handle on the left side of the
cover
1
Lift open the Printer Top Cover
Figure 2 Latching the Printer Top Cover
3. (510dp): Remove the Control Panel
03/2003
4-139
2
Do not release the Top Cover until
the latch engages
(REP 3.3).
Repairs and Adjustments
REP 14.1