Rep 14.3 L/H Cover Assembly - Xerox Phaser 7500 Service Manual

Service Parts Disassembly

REP 14.3 L/H Cover Assembly

PL14.2.2
8-148
Caution
Do not touch the Roll surface of the 2nd BTR Assembly.
1. Remove the Top Rear Cover and the Rear Cover (REP 19.6,
2. Remove the Left Rear Cover (REP 19.4,
3. Remove the wiring harness that is connected to the Left Hand Cover Assembly
from the 2 clamps that secure it.
4. Disconnect the wiring harness connector that is connected to the Left Hand
Cover Assembly.
5. Remove the KL Clip that secures the Rear Support at the rear, and remove the
Rear Support from the Left Hand Cover Assembly.
6. Turn the Front Support at the front counterclockwise by 90° and remove the
Front Support from the hole of the Frame.
7. Lift up the Left Hand Cover Assembly while keeping it horizontal and remove it
from the printer.
page 8-217).
page 8-215).
Phaser 7500 Printer Service Manual
s7500-211