NEC Univerge SV8100 Features And Specifications Manual page 342

Issue 1.0
Program
Program Name
Number
20-13-41 Class of Service Options
(Supplementary Service) – Voice
Mail Message Indication on DSS
20-13-42 Class of Service Options
(Supplementary Service) –
Extension Data Swap Enabling
20-13-44 Class of Service Options
(Supplementary Service) – Live
Monitor Enabling
20-13-45 Class of Service Options
(Supplementary Service) – MIC
Key Mode While Call Monitoring
20-13-47 Class of Service Options
(Supplementary Service) –
Station Number Display
20-13-48 Class of Service Options
(Supplementary Service) –
Station Name Display
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
20-13-50 Class of Service Options
(Supplementary Service) – AIC
Agent Display which Call is From
20-13-51 Class of Service Options
(Supplementary Service) –
Number and Name Appear in the
Directory
Operation
To set up and program the Cordless DECT Terminals (DTL-8R-1( )):
1. Press and hold down
on the LCD.
2. Press Ring/Vol repeatedly to scroll through the line key (LK) and feature options for function key F1.
2 - 318
Description/Comments
Turns Off (0) or On (1) the Voice Mail
Message Indication for an extension on
a DSS console.
Turns Off or On an extension user ability
to use the Station Relocation feature.
Turns Off or On an extension user ability
to use Live Monitor.
Set per class of service, when in Call
Monitoring Mode determines if the
monitored parties receives the barge in
alert tone when Coaching Mode is
enabled.
Determine if a station Number is
displayed (On) or not displayed (Off) in
the LCD when the phone is idle.
Determine if a station Name will be
displayed (On) or not displayed (Off) in
the LCD when the phone is idle.
Determine if a BLF of the station will
light when a Normal CO call is ringing
the phone.
Determine if the station logged in via
AIC codes shows which queue the call
is coming from.
Determine if an extension name and
number are listed (On) or unlisted (Off)
in the directory.
and , then press TALK. The F1 LED flashes red and F1=LK01 is displayed
#
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Enable
1 = Disable
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Cordless DECT Terminals (US Only)
Level
1 2 3