Cordless Dect Terminals (Us Only) - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
The Cordless DECT Terminals may be used with the UNIVERGE SV8100 KTS. The DTL-8R-1 TEL uses
1.9 GHz DECT 6.0 FM Technology and is connected in tandem to a multiline terminal.
Press the applicable key on the Base Unit to Switch between Cordless operation and multiline terminal
operation.
Feature
Digital Technology
LCD
Silent Alarm
Dedicated Keys
Programmable Line Keys
Operational Range
Message Waiting Indication
Headset Connection
Channels
Determined by environmental conditions. These are cordless RF devices and, therefore, some interference
may take place when operating in the same environment as other wireless devices which operate within the
same frequency spectrum.
Conditions
The Cordless DECT Terminals can be used in conjunction with the UNIVERGE SV8100, and
DTL Digital Multiline Telephones.
Battery Capacity is 910 mAh, 2.4V with a Talk Mode of 16 hours (typical) and a Standby
Mode of seven days (typical).
The battery can be hot swapped while on a call. The battery must be replaced with another
charged battery pack within 20 seconds, otherwise the connection is lost.
The handset has visual and audible indicators to warn of a low battery condition.
When a message is received, the message icon is displayed.
Synchronous Ringing does not apply to the cordless terminals.
A beep indicates when the cordless terminal receives off-hook ringing.
SV8100 Features and Specifications Manual

Cordless DECT Terminals (US Only)

TALK, TRANSFER, HOLD, CONF, SPEAKER, REDIAL, MUTE, R/VOL
Cordless DECT Terminals
(DTL-8R-1( ))
1.9 GHz 6.0
2-line, 24-digit LCD Display
Yes
8
50~150 feet (expandable with repeaters)
Yes (Icon)
Yes
5 channels by 12 time slots
Issue 1.0
2 - 303