Toyota T100 1996 Service Manual page 1868

1996 TOYOTA T100 (RM449U)
BODY ELECTRICAL − WIPER AND WASHER SYSTEM
Non Variable Type
Switch position
INT
Variable Type
Switch position
INT
If operation is not as specified, replace the wiper and washer
switch.
4. Low Speed:
INSPECT WIPER MOTOR OPERATION
Connect the positive (+) lead from the battery to terminal 3 and
the negative (−) lead from the battery to the motor body, check
that the motor operates at low speed.
If operation is not as specified, replace the motor.
N05983
5. High Speed:
INSPECT WIPER MOTOR OPERATION
Connect the positive (+) lead from the battery to terminal 2 and
the negative (−) lead from the battery to the motor body, check
that the motor operates at high speed.
If operation is not as specified, replace the motor.
N05984
6. Stopping at Stop Position:
INSPECT WIPER MOTOR OPERATION
(a) Operate the motor at low speed and stop the motor op-
eration anywhere except at the stop position by discon-
necting positive (+) lead from terminal 3.
N05985
Specified value
3.3 ± 1 secs.
Specified value
1.6 ± 1 secs.
FAST
10.7 ± 5 secs.
LOW
BE−33
Approx. 12 V
0 V
Approx. 12 V
0 V
Approx. 12 V
0 V
V06095