Show Ntp Status - Dell Force10 Z9000 Reference Manual

Field
disp
Example
FTOS#show ntp associations
remote
=============================================================
10.10.120.5 0.0.0.0
*172.16.1.33 127.127.1.0 11 6 16
104.16
172.31.1.33 0.0.0.0
192.200.0.2 0.0.0.0
* master (synced), # master (unsynced), + selected, - candidate
FTOS#
Related

show ntp status

Commands
show ntp status
Display the current NTP status.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ntp status
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage The following describes the show ntp status command shown in the Example below.
Information
Field
"Clock is..."
"frequency is..."
"reference time is..."
1442
Description
Displays the dispersion.
ref clock
– displays the current NTP status.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
States whether or not the switch clock is synchronized, which NTP
stratum the system is assigned and the IP address of the NTP peer.
Displays the frequency (in ppm), stability (in ppm) and precision (in
Hertz) of the clock in this system.
Displays the reference time stamp.
st when poll reach delay
16 - 256
16 - 256
16 - 256
offset disp
0 0.00 0.000 16000.0
377 -0.08 -1499.9
0 0.00 0.000 16000.0
0 0.00 0.000 16000.0