Enable Ospf Restart-Helper-Lsa-Check - Extreme Networks ExtremeWare XOS Command Reference Manual

OSPF Commands

enable ospf restart-helper-lsa-check

enable ospf [vlan [all | <vlan-name>] | area <area-identifier> | virtual-
link <router-identifier> <area-identifier>] restart-helper-lsa-check
Description
Enables the restart helper router to terminate graceful OSPF restart when received LSAs would affect
the restarting router.
Syntax Description
vlan-name
all
area-identifier
router-identifier
Default
The defaut is enabled.
Usage Guidelines
This command configures the restart helper router to terminate graceful OSPF restart when received
LSAs would affect the restarting router. This will occur when the restart-helper receives an LSA that
will be flooded to the restarting router or when there is a changed LSA on the restarting router's
retransmission list when graceful restart is initiated.
Example
The following command configures a router to terminate graceful OSPF restart for all routers in area
10.20.30.40 if it receives an LSA that would affect routing:
enable ospf area 10.20.30.40 restart-helper-lsa-check
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
1336
Specifies a VLAN name.
Specifies all VLANs
Specifies an OSPF area.
Specifies the router ID of the remote router of the virtual link.
ExtremeWare XOS 11.3 Command Reference