Show Ospf Lsdb - Extreme Networks ExtremeWare XOS Command Reference Manual

OSPF Commands

show ospf lsdb

show ospf lsdb {detail | stats} {area [<area-identifier> | all]}
{{lstype} [<lstype> | all]} {lsid <lsid-address>{<lsid-mask>}}
{routerid <routerid-address> {<routerid-mask>}} {interface[[<ip-
address>{<ip-mask>} | <ipNetmask>] | vlan <vlan-name>]}
Description
Displays a table of the current Link-State Database (LSDB).
Syntax Description
detail
stats
area-identifier
all
lstype
lsid
lsid-mask
interface
routerid-address
vlan-name
Default
Display in summary format.
Usage Guidelines
ExtremeWare XOS provides several filtering criteria for the
multiple search criteria and only the results matching all of the criteria are displayed. This allows you to
control the displayed entries in large routing tables.
A common use of this command is to omit all optional parameters, resulting in the following shortened
form:
show ospf lsdb
The shortened form displays all areas and all types in a summary format.
You can filter the display using either the area ID, the remote router ID, or the link-state ID. The default
setting is
all
1344
Specifies to display all fields of matching LSAs in a multi-line format.
Specifies to display the number of matching LSAs, but not any of their
contents.
Specifies an OSPF area.
Specifies all OSPF areas.
Specifies an LS type
Specifies an LS ID.
Specifies an LS ID mask
Specifies to display interface types.
Specifies a LSA router ID address.
Specifies a VLAN name.
with no detail. If detail is specified, each entry includes complete LSA information.
command. You can specify
show ospf lsdb
ExtremeWare XOS 11.3 Command Reference