Configure Netlogin Dot1X Timers Supplicant-Response-Timeout - Extreme Networks ExtremeWare Command Reference Manual

Security Commands
configure netlogin dot1x timers
supplicant-response-timeout

configure netlogin dot1x timers supplicant-response-timeout

<supplicant-response-timeout>
Description
Configures the 802.1x timers for Network Login
Syntax Description
supplicant response Specifies the length of time the switch waits for a response from the supplicant. The range
timeout is 1 to 120 seconds.
Default
The default value is 30 seconds.
Usage Guidelines
The supplicant response timeout value is a global setting that is applicable for all ports.
Example
The following example configures a supplicant response timer of 60 seconds:
configure netlogin dot1x timers supplicant-response-timeout 60
History
This command was first available in ExtremeWare 7.7.
Platform Availability
This command is available on all platforms.
888 ExtremeWare 7.7 Command Reference Guide