Match Ip Next-Hop; Match Ip Route-Source - Dell Force10 MXL Blade Reference Manual

match metric
match route-type
match tag

match ip next-hop

Configure a filter to match routes based on the next-hop IP addresses specified in an IP access list or IP
prefix list.
Syntax match ip next-hop { access-list | prefix-list prefix-list-name }
Parameters
access-list-name
prefix-list prefix-list-name
Defaults Not configured.
Command Modes ROUTE-MAP
Command
Version 8.3.16.1
History
Related
match interface
Commands
match ip address

match ip route-source

match metric
match route-type
match tag
match ip route-source
Configure a filter to match routes based on the routes advertised by routers specified in IP access lists
or IP prefix lists.
Syntax match ip route-source { access-list | prefix-list prefix-list-name }
Parameters
access-list-name
prefix-list
prefix-list-name
Defaults Not configured.
Command Modes
ROUTE-MAP
Command
Version 8.3.16.1
History
Redistributes routes that match a specific metric.
Redistributes routes that match a route type.
Redistributes routes that match a specific tag.
Enter the name of a configured IP access list, up to 140 characters.
prefix-list
Enter the keywords
list.
Introduced on MXL 10/40GbE Switch IO Module
Redistributes routes that match the next-hop interface.
Redistributes routes that match an IP address.
Redistributes routes that match routes advertised by other routers.
Redistributes routes that match a specific metric.
Redistributes routes that match a route type.
Redistributes routes that match a specific tag.
Enter the name of a configured IP access list, up to 140 characters.
prefix-list
Enter the keywords
up 10 140 characters.
Introduced on MXL 10/40GbE Switch IO Module
followed by the name of configured prefix
followed by the name of configured prefix list,
Access Control Lists (ACL) | 135