Dynamic Logging - Alcatel OmniSwitch 6624 Network Configuration Manual

LDAP Servers

Dynamic Logging

Dynamic logging may be performed by an LDAP-enabled directory server if an LDAP server is config-
ured first in the list of authentication servers configured through the the
accounting session
records) only. For example:
-> aaa accounting session ldap2 rad1 rad2
In this example, server ldap2 will be used for dynamic logging, and servers rad1 and rad2 will be used
for accounting.
If you specify a RADIUS server first, all of the servers specified will be used for recording history records
(not logging). For example:
-> aaa accounting session rad1 ldap2
In this example, both the rad1 and ldap2 servers will be used for history only. Dynamic logging will not
take place on the LDAP server.
Dynamic entries are stored in the LDAP-enabled directory server database from the time the user success-
fully logs in until the user logs out. The entries are removed when the user logs out.
Entries are associated with the switch the user is logged into.
•
Each dynamic entry contains information about the user's connection. The related attribute in the
•
server is bop-loggedusers.
A specific object class called alcatelBopSwitchLogging contains three attributes as follows:
Attribute
bop-basemac
bop-switchname
bop-loggedusers
Each switch that is connected to the LDAP-enabled directory server will have a DN starting with bop-
basemac-xxxxx, ou=bop-logging. If the organizational unit ou=bop.logging exists somewhere in the tree
under searchbase, logging records are written on the server. See the server manufacturer's documentation
for more information about setting up the server.
The bop-loggedusers attribute is a formatted string with the following syntax:
loggingMode : accessType ipAddress port macAddress vlanList userName
The fields are defined here:
Field
loggingMode
page 17-24
command. Any other servers configured are used for accounting (storing history
Description
MAC range, which uniquely identifies the switch
Host name of the switch.
Current activity records for every user logged
onto the switch identified by bop-basemac.
Possible Values
ASA x—for an authenticated user session, where x is the num-
ber of the session
AVLAN—for Authenticated VLAN session in single authority
mode
AVLAN y—for Authenticated VLAN session in multiple
authority mode, where y is relevant VLAN
OmniSwitch 6624/6648 Network Configuration Guide
Managing Authentication Servers
aaa accounting vlan or aaa
April 2004