Setting Vrrp Traps; Verifying The Vrrp Configuration - Alcatel OmniSwitch 6624 Network Configuration Manual

Verifying the VRRP Configuration

To disable a virtual router, use the disable keyword.
-> vrrp 7 3 disable
A virtual router must be disabled before it may be modified. Use the vrrp command to disable the virtual
router first; then use the command again to modify the parameters. For example:
-> vrrp 7 3 disable
-> vrrp 7 3 priority 200
-> vrrp 7 3 enable
In this example, virtual router 7 on VLAN 3 is disabled. The virtual router is then modified to change its
priority setting. (For information about configuring the priority setting, see
Priority" on page 16-9.) The virtual router is then re-enabled and will be active on the switch.
To delete a virtual router, use the no form of the vrrp command with the relevant VRID and VLAN ID.
For example:
-> no vrrp 7 3
Virtual router 7 on VLAN 3 is deleted from the configuration. (The virtual router does not have to be
disabled before you delete it.)

Setting VRRP Traps

A VRRP router has the capability to generate VRRP SNMP traps for events defined in the VRRP SNMP
MIB. By default traps are enabled.
In order for VRRP traps to be generated correctly, traps in general must be enabled on the switch through
the SNMP CLI. See the OmniSwitch 6624/6648 Switch Management Guide for more information about
enabling SNMP traps globally.
To disable VRRP traps, use the no form of the
-> no vrrp trap
To re-enable traps, enter the vrrp trap command:
-> vrrp trap
Verifying the VRRP Configuration
A summary of the show commands used for verifying the VRRP configuration is given here:
show vrrp
show vrrp statistics
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
page 16-12
vrrp trap command.
Displays the virtual router configuration for all virtual routers or for a
particular virtual router.
Displays statistics about VRRP packets for all virtual routers configured
on the switch or for a particular virtual router.
OmniSwitch 6624/6648 Network Configuration Guide
Configuring VRRP
"Configuring Virtual Router
April 2004