Installing The Conveyor Tracking Module (Ctm) - ABB OmniCore V250XT Type B Product Manual

3.7.6 Installing the conveyor tracking module (CTM)

Overview
The conveyor tracking module uses network communication to share conveyor
speed and position data with one or more robot controllers. It contains a WAN port,
which is used to connect to the robot controllers and two LAN ports that can be
used for installation and service purposes.
xx2100002526
Required parts
Spare part
Conveyor tracking module [3103-
1]
CONNECTOR KIT - DSQC2000
Harness 24V_CTM
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.6 Installing the conveyor tracking module (CTM)
Article number Note
3HNA027579-001 DSQC2000
3HNA029345-001
3HAC069618-001 Power cable of CTM
Continues on next page
137