Installing Add-On Devices; Installing Integrated Vision - ABB OmniCore E10 Product Manual

3 Installation and commissioning

3.6.1 Installing Integrated Vision

3.6 Installing add-on devices

3.6.1 Installing Integrated Vision
Required parts
Spare part
8 mm camera lens, LTC-08F
12.5 mm camera lens, LFC-12.5F
16 mm camera lens, LFC-16F1
25 mm camera lens, LFC-25F1
Integr Vision camera med. Res
Integr Vision camera high res
Integr Vision power cable
Integr Vision ethernet cable
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore E10
Application manual - Integrated
Vision
Installing Integrated Vision camera connections
1
Continues on next page
102
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 28.
© Copyright 2019-2022 ABB. All rights reserved.
Article number Note
3HAC053944-001
3HAC053944-002
3HAC053944-003
3HAC053944-004
3HAC053953-001 DSQC1020
3HAC053954-001 DSQC1021
3HAC051753-003
3HAC051736-003
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC076810-008
3HAC067707-001
Note/Illustration
Product manual - OmniCore E10
202.
3HAC079399-001 Revision: C