Display Acl - HP E4510-48G Command Reference Manual

[Sysname] acl number 4000
[Sysname-acl-ethernetframe-4000] description This acl is used in geth 1/0/1

display acl

Syntax
display acl { acl-number | all | name acl-name }
View
Any view
Default Level
1: Monitor level
Parameters
acl-number: IPv4 ACL number, which must be in the following ranges:
2000 to 2999 for basic IPv4 ACLs
3000 to 3999 for advanced IPv4 ACLs
4000 to 4999 for Ethernet frame header ACLs
all: Specifies all IPv4 ACLs.
name acl-name: Specifies the name of the ACL, which is a case insensitive string of 1 to 32 characters.
It must start with an English letter and cannot be the English word of all to avoid confusion.
Description
Use the display acl command to display information about a specified IPv4 ACL or all IPv4 ACLs.
Note that this command displays ACL rules in the match order.
Examples
# Display information about IPv4 ACL 2001.
<Sysname> display acl 2001
Basic ACL 2001, named flow, 1 rule,
ACL's step is 5
rule 5 permit source 1.1.1.1 0 (5 times matched)
rule 5 comment This rule is used in geth 1/0/1
Table 14-3 display acl command output description
Basic ACL 2001
named flow
1 rule
ACL's step is 5
5 times matched
Field Description
The displayed information is about basic IPv4 ACL
2001.
The name of the ACL is flow.
The ACL contains one rule.
The rule numbering step is 5.
There have been five matches for the rule. Only ACL
matches performed by software are counted.
This field is not displayed when no match is found.
14-9