HP E4510-48G Command Reference Manual page 1226

4510g series
Table of Contents

Advertisement

http-version
Syntax
http-version v1.0
undo http-version
View
HTTP test type view
Default Level
2: System level
Parameters
v1.0: The HTTP version is 1.0 in an HTTP test.
Description
Use the http-version command to configure the HTTP version used in an HTTP test.
Use the undo http-version command to restore the default.
By default, HTTP 1.0 is used in an HTTP test.
Examples
# Configure the HTTP version as 1.0 in an HTTP test.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] http-version v1.0
next-hop
Syntax
next-hop ip-address
undo next-hop
View
ICMP echo test type view
Default Level
2: System level
Parameters
ip-address: IP address of the next hop.
Description
Use the next-hop command to configure the next hop IP address for an IP packet.
Use the undo next-hop command to remove the configured next hop IP address.
By default, no next hop IP address is configured.
18-18

Advertisement

Table of Contents
loading

Table of Contents