Security Volume - HP E4510-48G Command Reference Manual

Parameters
profile-name: Use profile name, a string of 1 to 31 characters, case sensitive. It can only contain
English letters, numbers, underlines, and must start with an English letter. A user profile name must be
globally unique.
dot1x: Uses 802.1X authentication when users access the device. Refer to 802.1X Configuration in
the Security Volume for the detailed information about 802.1X.
Description
Use the user-profile command to create a user profile and enter the corresponding user profile view. If
the specified user profile already exists, you will directly enter the corresponding user profile view,
without the need to create a user profile. Use the undo user-profile command to remove an existing,
disabled user profile.
By default, no user profiles exist on the device.
Note that:
The dot1x keyword is required when you creating a user profile, and it's optional when you
entering the user profile view or deleting an existing user profile.
An enabled user profile cannot be removed.
Related commands: user-profile enable.
Examples
# Create a user profile a123, using 802.1X authentication.
<Sysname> system-view
[Sysname] user-profile a123 DOT1X
[Sysname-user-profile-DOT1X-a123]
# Enter the corresponding user profile view of a123.
<Sysname> system-view
[Sysname] user-profile a123
[Sysname-user-profile-DOT1X-a123]
6-3