Display Rrpp Verbose - HP E4510-48G Command Reference Manual

4510g series
Table of Contents

Advertisement

Field
Secondary Port
Common Port
Edge Port
Packet Direct
Hello
Link-Down
Common Flush FDB
Complete Flush FDB
Edge Hello
Major Fault
Packet Total

display rrpp verbose

Syntax
display rrpp verbose domain domain-id [ ring ring-id ]
View
Any view
Default Level
1: Monitor level
Parameters
domain-id: RRPP domain ID, in the range 1 to 8.
ring-id: RRPP ring ID, in the range 1 to 64.
Description
Use the display rrpp verbose command to display detailed RRPP information.
If you have specified an RRPP ring ID in the command, the detailed information of the specified ring in
the specified RRPP domain appears. Otherwise, the detailed information of all the rings in the
specified RRPP domain appears.
The secondary port field means the node mode is master node or
transit node. "-" appears when the port is not configured on the ring
or the board to which the port belongs does not start, and in this
case, no corresponding statistics appears.
The common port field means the node mode is edge node or
assistant edge node. "-" appears when the port is not configured on
the ring or the board to which the port belongs does not start, and in
this case, no corresponding statistics appears.
The edge port field means the node mode is edge node or assistant
edge node. "-" appears when the port is not configured on the ring
or the board to which the port belongs does not start, and in this
case, no corresponding statistics appears.
Packet transmission direction on the port: Send or Rcv
Hello packet statistics received/sent on the port
Link-Down packet statistics received/sent on the port
Common-Flush-FDB packet statistics received/sent on the port
Complete-Flush-FDB packet statistics received/sent on the port
Edge-Hello packet statistics received/sent on the port
Major-Fault packet statistics received/sent on the port
Total number of packets received/sent on the port. Here only Hello,
Link-Down, Common-Flush-FDB, Complete-Flush-FDB,
Edge-Hello, and Major-Fault packets of RRPP are counted.
3-7
Description

Advertisement

Table of Contents
loading

Table of Contents