HP E4510-48G Command Reference Manual page 1170

All probe packets sent by the source device got responses
The minimum time, average time, and maximum time for the packet's roundtrip time are 1 ms, 2
ms, and 3 ms respectively
# Check whether the device with an IP address of 3.3.3.2 is reachable. Only the check results are
displayed.
<Sysname> ping -q 3.3.3.2
PING 3.3.3.2: 56 data bytes, press CTRL_C to break
--- 3.3.3.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/1 ms
# Check whether the device with an IP address of 3.3.3.2 is reachable. The route information is
required to be displayed.
<Sysname> ping -r 3.3.3.2
PING 3.3.3.2: 56 data bytes, press CTRL_C to break
Reply from 3.3.3.2: bytes=56 Sequence=1 ttl=255 time=2 ms
Record Route:
3.3.3.2
3.3.3.1
Reply from 3.3.3.2: bytes=56 Sequence=2 ttl=255 time=1 ms
Record Route:
3.3.3.2
3.3.3.1
Reply from 3.3.3.2: bytes=56 Sequence=3 ttl=255 time=1 ms
Record Route:
3.3.3.2
3.3.3.1
Reply from 3.3.3.2: bytes=56 Sequence=4 ttl=255 time=2 ms
Record Route:
3.3.3.2
3.3.3.1
Reply from 3.3.3.2: bytes=56 Sequence=5 ttl=255 time=1 ms
Record Route:
3.3.3.2
3.3.3.1
--- 3.3.3.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
The above information indicates the following:
The destination host was reachable
The IP address 3.3.3.1 was reached first, and then 3.3.3.2.
15-3