Priority Mapping Configuration Commands; Priority Mapping Table Configuration Commands; Display Qos Map-Table - HP E4510-48G Command Reference Manual

2

Priority Mapping Configuration Commands

Priority Mapping Table Configuration Commands

display qos map-table

Syntax
display qos map-table [ dot1p-dp | dot1p-lp | dscp-dot1p | dscp-dp | dscp-dscp ]
View
Any view
Default Level
1: Monitor level
Parameters
dot1p-lp: Specifies the 802.1p precedence-to-local precedence mapping table.
dot1p-dp: Specifies the 802.1p precedence-to-drop precedence mapping table.
dscp-dp: Specifies the DSCP-to-drop precedence mapping table.
dscp-dot1p: Specifies the DSCP-to-802.1p precedence mapping table.
dscp-dscp: Specifies the DSCP-to-DSCP mapping table.
Description
Use the display qos map-table command to display the configuration of a priority mapping table.
If the type of the priority mapping table is not specified, the configuration of all the priority mapping
tables is displayed.
Related commands: qos map-table.
Examples
# Display the configuration of the 802.1p precedence-to-drop precedence mapping table.
<Sysname> display qos map-table dot1p-dp
MAP-TABLE NAME: dot1p-dp
IMPORT : EXPORT
0 : 2
1 : 2
2 : 2
3 : 1
4 : 1
5 : 1
6 : 0
7 : 0
TYPE: pre-define
2-1