Bind-Attribute - HP E4510-48G Command Reference Manual

command in Login Commands of the System Volume. If the authentication method requires users
to provide usernames and passwords, the levels of commands that a user can access after login
depends on the level of the user. For an SSH user authenticated with an RSA public key, available
commands depend on the level specified on the user interface.
If you remove the specified work directory from the file system, the FTP/SFTP user(s) will not be
able to access the directory.
If the specified work directory carries slot information, the FTP/SFTP user(s) will not be able to
access the directory after a switchover occurs. Therefore, specifying slot information for the work
directory is not recommended.
Examples
# Configure the authorized VLAN of user group abc as VLAN 3.
<Sysname> system-view
[Sysname] user-group abc
[Sysname-ugroup-abc] authorization-attribute vlan 3

bind-attribute

Syntax
bind-attribute { call-number call-number [ : subcall-number ] | ip ip-address | location port
slot-number subslot-number port-number | mac mac-address | vlan vlan-id } *
undo bind-attribute { call-number| ip | location | mac | vlan } *
View
Local user view
Default Level
3: Manage level
Parameters
call-number call-number: Specifies a calling number for ISDN user authentication. The call-number
argument is a string of 1 to 64 characters.
subcall-number: Specifies the sub-calling number. The total length of the calling number and the
sub-calling number cannot be more than 62 characters.
ip ip-address: Specifies the IP address of the user.
location: Specifies the port binding attribute of the user.
port slot-number subslot-number port-number: Specifies the port to which the user is bound. The
slot-number argument is in the range 0 to 15, the subslot-number argument is in the range 0 to 15, and
the port-number argument is in the range 0 to 255. Only the numbers make sense here; port types are
not taken into account.
mac mac-address: Specifies the MAC address of the user in the format of H-H-H.
vlan vlan-id: Specifies the VLAN to which the user belongs. The vlan-id argument is in the range 1 to
4094.
Description
Use the bind-attribute command to configure binding attributes for a local user.
1-15