Display Ripng Interface - HP E4510-48G Command Reference Manual

display ripng interface

Syntax
display ripng process-id interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
interface-type interface-number: Specifies an interface.
Description
Use the display ripng interface command to display the interface information of the RIPng process.
If no interface is specified, information about all interfaces of the RIPng process will be displayed.
Examples
# Display the interface information of RIPng process 1.
<Sysname> display ripng 1 interface
Interface-name: Vlan-interface100
Link Local Address: FE80::20F:E2FF:FE30:C16C
Split-horizon: on
MetricIn: 0
Default route: off
Summary address:
3:: 64
3:: 16
Table 5-3 display ripng interface command output description
Field
Interface-name
Link Local Address
Split-horizon
Poison-reverse
MetricIn/MetricOut
Poison-reverse: off
MetricOut: 1
Name of an interface running RIPng
Link-local address of an interface running RIPng
Indicates whether the split horizon function is enabled (on: Enabled; off:
Disabled)
Indicates whether the poison reverse function is enabled (on: Enabled; off:
Disabled)
Additional metric to incoming and outgoing routes
5-5
Description