Display Rmon Event - HP E4510-48G Command Reference Manual

Field
VALID
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value

display rmon event

Syntax
display rmon event [ entry-number ]
View
Any view
Default Level
1: Monitor level
Parameters
entry-number: Index of an RMON event entry, in the range 1 to 65535. If no entry is specified, the
configuration of all event entries is displayed.
Description
Use the display rmon event command to display the configuration of the specified or all RMON event
entries.
Displayed information includes event index, event owner, event description, action triggered by the
event (such as sending log or trap messages), and last time the event occurred (the elapsed time
since system initialization/startup) in seconds.
Related commands: rmon event.
Status of the entry identified by the index (VALID means the entry is
valid, and UNDERCREATION means invalid. You can use the display
rmon command to view the invalid entry, while with the display
current-configuration and display this commands you cannot view the
corresponding rmon commands.), corresponding to the MIB node
alarmStatus.
The sampling type (the value can be absolute or delta), corresponding to
the MIB node alarmSampleType.
Alarm variable, namely, the monitored MIB node, corresponding to the
MIB node alarmVariable.
Sampling interval, in seconds, corresponding to the MIB node
alarmInterval.
Alarm rising threshold (When the sampling value is bigger than or equal
to this threshold, a rising alarm is triggered.), corresponding to the MIB
node alarmRisingThreshold.
Alarm falling threshold (When the sampling value is smaller than or
equal to this threshold, a falling alarm is triggered.), corresponding to the
MIB node alarmFallingThreshold.
How an alarm can be triggered, corresponding to the MIB node
alarmStartupAlarm.
The last sampled value, corresponding to the MIB node alarmValue.
12-2
Description