HP E4510-48G Command Reference Manual page 1279

View
Cluster view
Default Level
2: System level
Parameters
member-number: Member number assigned to the candidate device to be added to a cluster, ranging
from 1 to 31.
mac-address: MAC address of the candidate device (in hexadecimal form of H-H-H).
password: Password of the candidate device, a string of 1 to 16 characters. The password is required
when you add a candidate device to a cluster. However, this argument is not needed if the candidate
device is not configured with a super password.
Description
Use the add-member command to add a candidate device to a cluster.
Note that:
You must add a cluster member through the management device.
When adding a member device to a cluster, you need not assign a number to the device. The
management device will automatically assign a usable number to the newly added member
device.
After a candidate device joins the cluster, its level 3 password is replaced by the super password
of the management device in cipher text.
Examples
# Add a candidate device to the cluster, setting the member number to 6. (Assume that the MAC
address and user password of the candidate device are 000f-e200-35E7 and 123456 respectively.)
<aabbcc_0.Sysname> system-view
[aabbcc_0.Sysname] cluster
[aabbcc_0.Sysname-cluster] add-member 6 mac-address 000f-e200-35e7 password 123456
administrator-address
Syntax
administrator-address mac-address name cluster-name
undo administrator-address
View
Cluster view
Default Level
2: System level
Parameters
mac-address: MAC address of the management device (in hexadecimal form of H-H-H).
20-15