Display Cfd Mep - HP E4510-48G Command Reference Manual

Default level
2: System level
Parameters
None
Description
Use the display cfd md command to display the MD configuration information.
Examples
# Display the MD configuration information.
<Sysname> display cfd md
CFD is enabled.
8 maintenance domain(s) configured:
Level: 0 Maintenance domain: mdtest_0
Level: 1 Maintenance domain: mdtest_1
Level: 2 Maintenance domain: mdtest_2
Level: 3 Maintenance domain: mdtest_3
Level: 4 Maintenance domain: mdtest_4
Level: 5 Maintenance domain: mdtest_5
Level: 6 Maintenance domain: mdtest_6
Level: 7 Maintenance domain: mdtest_7
Table 6-8 display cfd md command output description
8 maintenance domain(s) configured
Level
Maintenance domain

display cfd mep

Syntax
display cfd mep mep-id service-instance instance-id
View
Any view
Default level
2: System level
Parameters
mep-id: MEP ID, ranging from 1 to 8191.
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
Field
6-16
Description
Number of MDs configured
Level of MD, each level allows only one MD.
Name of MD