Ip Http Acl; Ip Http Enable - HP E4510-48G Command Reference Manual

ip http acl

Syntax
ip http acl acl-number
undo ip http acl
View
System view
Default Level
2: System level
Parameters
acl-number: ACL number, in the range 2000 to 2999: basic IPv4 ACL
Description
Use the ip http acl command to associate the HTTP service with an ACL.
Use the undo ip http acl command to remove the association.
By default, the HTTP service is not associated with any ACL.
After the HTTP service is associated with an ACL, only the clients permitted by the ACL can access the
device.
Related commands: acl number in ACL Commands in the Security Volume.
Examples
# Configure to associate the HTTP service with ACL 2001 and only allow the clients within the
10.10.0.0/16 network segment to access the device through the Web function.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 10.10.0.0 0.0.255.255
[Sysname-acl-basic-2001] quit
[Sysname] ip http acl 2001

ip http enable

Syntax
ip http enable
undo ip http enable
View
System view
Default Level
2: System level
Parameters
None
8-2