Ipv6 Basics Configuration Commands; Display Dns Ipv6 Dynamic-Host - HP E4510-48G Command Reference Manual

12

IPv6 Basics Configuration Commands

IPv6 Basics Configuration Commands

display dns ipv6 dynamic-host

Syntax
display dns ipv6 dynamic-host
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dns ipv6 dynamic-host command to display IPv6 dynamic domain name information,
including the domain name, IPv6 address, and TTL of the DNS entries.
You can use the reset dns ipv6 dynamic-host command to clear all IPv6 dynamic domain name
information from the cache.
Examples
# Display IPv6 dynamic domain name information.
<Sysname> display dns ipv6 dynamic-host
No Host
1 aaa
Table 12-1 display dns ipv6 dynamic-host command output description
No
Host
IPv6 address
TTL
IPv6 Address TTL
2001::2
Field
6
Description
Sequence number
Host name
IPv6 address of the host
Time within which an entry can be cached, in seconds
12-1