Port Security Configuration Commands; Display Port-Security - HP E4510-48G Command Reference Manual

8

Port Security Configuration Commands

Port Security Configuration Commands

display port-security

Syntax
display port-security [ interface interface-list ]
View
Any view
Default Level
2: System level
Parameters
interface-list: Ethernet port list, in the format of { interface-type interface-number [ to interface-type
interface-number ] }&<1-10>, where &<1-10> means that you can specify up to 10 port or port ranges.
The starting port and ending port of a port range must be of the same type and the ending port number
must be greater than the starting port number.
Description
Use the display port-security command to display port security configuration information, operation
information, and statistics about one or more specified ports or all ports.
Related commands: port-security enable, port-security port-mode, port-security ntk-mode,
port-security intrusion-mode, port-security max-mac-count, port-security mac-address security,
port-security authorization ignore, port-security oui, port-security trap.
Examples
# Display port security configuration information, operation information, and statistics about all ports.
<Sysname> display port-security
Equipment port-security is enabled
AddressLearn trap is enabled
Intrusion trap is enabled
Dot1x logon trap is enabled
Dot1x logoff trap is enabled
Dot1x logfailure trap is enabled
RALM logon trap is enabled
RALM logoff trap is enabled
RALM logfailure trap is enabled
Disableport Timeout: 20s
OUI value:
Index is 1, OUI value is 000d1a
8-1