Configuration Replace File; Display Archive Configuration - HP E4510-48G Command Reference Manual

configuration replace file

Syntax
configuration replace file filename
View
System view
Default Level
3: Manage level
Parameters
filename: Specifies the name of the replacement configuration file for configuration rollback.
Description
Use the configuration replace file command to set configuration rollback.
After the execution of this command, the current running configuration rolls back to the configuration
state based on the specified configuration file (filename).
Examples
# Roll back from the current running configuration to a previous configuration state based on a saved
configuration file my_archive_1.cfg.
<Sysname> system-view
[Sysname] configuration replace file my_archive_1.cfg
Info: Now replacing the current configuration. Please wait...
Info: Succeeded in replacing current configuration with the file my_archive_1.cfg.

display archive configuration

Syntax
display archive configuration
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display archive configuration command to display the information about configuration
rollback.
Examples
# Display the information about configuration rollback.
5-20