Display Rmon Statistics - HP E4510-48G Command Reference Manual

Sampling interval
Rising threshold
Falling threshold
When startup enables : risingOrFallingAlarm
This entry will exist : forever
Latest value
Table 12-5 display rmon prialarm command output description
Field
PrialarmEntry
owned by
VALID
Samples type
Sampling interval
Rising threshold
Falling threshold
linked with event
When startup enables
This entry will exist
Latest value

display rmon statistics

Syntax
display rmon statistics [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display rmon statistics command to display RMON statistics.
: 10(sec)
: 80(linked with event 1)
: 5(linked with event 2)
: 85
The entry of the private alarm table
Owner of the entry, user1 in this example
Status of the entry identified by the index (VALID means the entry is
valid, and UNDERCREATION means invalid. You can use the
display rmon command to view the invalid entry; while with the
display current-configuration and display this commands you
cannot view the corresponding rmon commands.)
Sampling type, whose value can be absolute or delta.
Sampling interval, in seconds. The system performs absolute sample
or delta sample to sampling variables according to the sampling
interval.
Alarm rising threshold. An event is triggered when the sampled value
is greater than or equal to this threshold.
Alarm falling threshold. An event is triggered when the sampled value
is less than or equal to this threshold.
Event index associated with the prialarm
How can an alarm be triggered
The lifetime of the entry, which can be forever or span the specified
period
The count result of the last sample
12-8
Description