Password (Ftp Test Type View); Probe Count - HP E4510-48G Command Reference Manual

password (FTP test type view)

Syntax
password password
undo password
View
FTP test type view
Default Level
2: System level
Parameters
password: Password used to log onto the FTP server, a string of 1 to 32 characters. It is case
sensitive.
Description
Use the password command to configure a password used to log onto the FTP server.
Use the undo password command to remove the configured password.
By default, no password is configured for logging onto the FTP server.
Related commands: username, operation.
Examples
# Configure the password used for logging onto the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password ftpuser

probe count

Syntax
probe count times
undo probe count
View
DHCP, DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter test type view
Default Level
2: System level
Parameters
times: Number of probes in an NQA test, in the range 1 to 15.
Description
Use the probe count command to configure the number of probes in an NQA test.
18-24