Display Ipv6 Routing-Table Verbose - HP E4510-48G Command Reference Manual

display ipv6 routing-table verbose

Syntax
display ipv6 routing-table verbose
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 routing-table verbose command to display detailed information about all active
and inactive routes, including the statistics of the entire routing table and information for each route.
Examples
# Display detailed information about all active and inactive routes.
<Sysname> display ipv6 routing-table verbose
Routing Table :
Destinations : 1
Destination : ::1
NextHop : ::1
RelayNextHop : ::
Neighbour : ::
Interface : InLoopBack0
State : Active NoAdv
Tunnel ID : 0x0
Age : 22161sec
Table 1-6 display ipv6 routing-table verbose command output description
Field
Destination
PrefixLength
Nexthop
Preference
RelayNextHop
Tag
Neighbour
ProcessID
Interface
Routes : 1
Destination IPv6 address
Prefix length of the address
Next hop
Route priority
Recursive next hop
Tag of the route
Neighbor address
Process ID
Outbound interface
1-19
PrefixLength : 128
Preference : 0
Tag : 0H
ProcessID : 0
Protocol : Direct
Cost : 0
Label : NULL
Description