Display Ip Routing-Table Protocol - HP E4510-48G Command Reference Manual

# Display brief information about active routes permitted by the prefix list test.
[Sysname] display ip routing-table ip-prefix test
Routes Matched by Prefix list : test
Summary Count : 2
Destination/Mask
2.2.2.0/24
2.2.2.1/32
For detailed description of the above output, see
# Display detailed information about both active and inactive routes permitted by IP prefix list test.
[Sysname] display ip routing-table ip-prefix test verbose
Routes Matched by Prefix list test :
Summary Count : 2
Destination: 2.2.2.0/24
Protocol: Direct
Preference: 0
NextHop: 2.2.2.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active Adv
Tag: 0
Destination: 2.2.2.1/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
For detailed description of the above output, see

display ip routing-table protocol

Syntax
display ip routing-table protocol protocol [ inactive | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
protocol: Routing protocol. It can be direct, rip, or static.
Proto Pre Cost
Direct 0 0
Direct 0 0
Process ID: 0
Interface: Vlan-interface2
Neighbour: 0.0.0.0
Process ID: 0
Interface: InLoopBack0
Neighbour: 0.0.0.0
NextHop Interface
2.2.2.1 Vlan2
127.0.0.1 InLoop0
Table 1-1.
Cost: 0
Label: NULL
Age: 00h20m52s
Cost: 0
Label: NULL
Age: 00h20m52s
Table 1-2.
1-10