Sysname - HP E4510-48G Command Reference Manual

Default Level
2: System level
Parameters
1: Sets the stop bits to 1.
1.5: Sets the stop bits to 1.5.
2: Sets the stop bits to 2.
Description
Use the stopbits command to set the stop bits of the user interface.
Use the undo stopbits command to revert to the default stop bits.
By default, the stop bits is 1.
The switch 4510G do not support communication with a terminal emulation program with stopbits
set to 1.5.
Changing the stop bits value of the switch to a value different from that of the terminal emulation
utility does not affect the communication between them.
Examples
# Set the stop bits to 2.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] stopbits 2

sysname

Syntax
sysname string
undo sysname
View
System view
Default Level
2: System level
Parameters
string: System name of the switch. This argument can contain 1 to 30 characters and defaults to
4510G.
1-21